Contact 772-286-2260

fantech® 40231 SO-05A-LP40231
  1. pin-int

fantech® 40231 SO-05A-LP40231

fantech® 40231 Centrifugal Fan, 115 V, 4.4 A, 526 W, 2807 rpm Speed

  • Manufacturer: Systemair
  • Brand Name: fantech®
  • Part#: SO-05A-LP40231
  • MPN: 40231
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading Available at Vero Beach
  • loading Available at All Branches

Fans are designed for easy installation and can be mounted in any angle. RE Series fans are approved for use as remote-mount exhausters with residential range hoods. Motors are capable of operating in air stream temperatures of up to 140 deg F. Fans are provided with either a flat base (RE Models) for flashing on pitched/shingle roofs and vertical walls or with a flanged base (REC Models) for curb-mounting. All units are 100% speed controllable through a decrease in voltage using either a solid state or transformer-type speed control. RE(C) exhausters can be supplied with optional equipment including, duct-mounting clamps, backdraft dampers and more. All units are backed by fantech® 5 years warranty.

fantech® Centrifugal Fan, 4.4 A, 115 V, 60 Hz, 1 ph Phase, 526 W, 2807 rpm, Roof/Wall Mounting, Sheet Metal, Finish: Baked-On Enamel/Galvanized, Gray, 10-15/16 in L x 6 in W

Amperage Rating      :      4.4 A
Color      :      Gray
Dimensions      :      10-15/16 in L x 6 in W
Finish      :      Baked-On Enamel/Galvanized
Frequency Rating      :      60 Hz
Material      :      Sheet Metal
Mounting Type      :      Roof/Wall
Phase      :      1 ph
Power Rating      :      526 W
SPECIAL_ORDER_ITEM      :      Y
Special Order Item      :      Y
Speed Rating      :      2807 rpm
Voltage Rating      :      115 V
  • 100% speed controllable
  • Suitable for airstream temperatures of up to 140 deg F
  • Excellent heat dissipation for long motor life
  • Built-in thermal overload protection with automatic reset
  • Fan air flow performance shall be based upon test conducted in accordance with AMCA standard 211 and 311 and shall be licensed to bear the AMCA certified ratings label
  • Fan shall be tested and approved by UL and CSA (or equal) for safety
  • Fan base shall be permanently-mounted to roof or vertical wall (flat flashing base) or to a curb (flanged base)
  • A conduit chase shall be provided for running electrical wiring through the base into the fan terminal box
  • Motorized impeller shall be an external rotor type with permanent split capacitor, motor shall be a permanently sealed self-lubricating ball bearing type
  • Motor shall be equipped with automatic reset thermal overload protection
  • Motor shall be acceptable for continuous-duty
  • Sufficient service factor shall be provided to ensure long maintenance-free operation over maximum load conditions
  • Fan wheel shall be of the backward inclined centrifugal-type with a well designed inlet venturi for maximum performance
  • Motorized impeller shall be both statically and dynamically balanced as one integral unit to provide for vibration-free performance
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/Fantech_40231_Catalog.pdf
  • pdfInstruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Fantech_40231_Instruction_Installation_Manual.pdf
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Fantech_40231_Specification_Sheet.pdf