Contact 772-286-2260

Asahi/America® 1605010 SO-45-AS1605-010
  1. pin-int

Asahi/America® 1605010 SO-45-AS1605-010

Asahi/America® Type 21 Series 1605010 True Union Ball Valve, 1 in, Socket x Threaded, PVC, 230 psi

  • Manufacturer: Asahi/America
  • Brand Name: Asahi/America®
  • Part#: SO-45-AS1605-010
  • MPN: 1605010
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading Available at Vero Beach
  • loading Available at All Branches

Type-21/21a ball valves are corrosion-resistant plastic manual true union design quarter-turn valves with hyperbolic flow characteristics, low pressure drops and reliable sealing. They are typically used in on/off applications and are offer relatively poor flow control. They are excellent for use in clean fluid service applications with very little to no suspended solids. Type-21/21a ball valves are well-suited for a wide variety of fluid flow applications. True union ball valves can be lifted from the line without having to move the piping simply by loosening the two-union nuts. The valves can be disassembled and parts may be replaced. They can be pneumatically or electrically actuated.

Asahi/America® True Union Ball Valve, Type 21 Series, 1 in Nominal, Socket x Threaded Connection, Full Port, 230 psi, Pressure Class: 150 lb, 2.76 in Orifice, 5-3/4 in Inlet to Outlet Length, 2.68 in Top to Inlet Center, Handle Operator, PVC Body, PTFE Seat, PVC Stem, EPDM/FKM Seal, ABS Handle, PVC Ball, 30 to 70 deg F, 2.76 in W, Additional Information: SCH 80/XH Schedule Rating

Additional Information      :      SCH 80/XH Schedule Rating
Ball Material      :      PVC
Body Material      :      PVC
Connection Type      :      Socket x Threaded
Dimensions      :      2.76 in W
Handle Material      :      ABS
Inlet to Outlet Length      :      5-3/4 in
Nominal Size      :      1 in
Operator Type      :      Handle
Orifice Size      :      2.76 in
Port Type      :      Full
Pressure Class      :      150 lb
Pressure Rating      :      230 psi
SPECIAL_ORDER_ITEM      :      Y
Seal Material      :      EPDM/FKM
Seat Material      :      PTFE
Series      :      Type 21 Series
Special Order Item      :      Y
Stem Material      :      PVC
Temperature Rating      :      30 to 70 deg F
Top to Inlet Center      :      2.68 in
  • Double O-ring seals on stem for added protection
  • Full vacuum-rated
  • Blocks in two-directions, upstream and downstream, leaving full pressure on the opposite end of the valve
  • Integrally molded ISO mounting pad for both manual and actuated operations
  • Integrally molded base pad to mount valves securely or panel mounting
  • PTFE seats with elastomeric backing cushions ensure bubble tight shut-off and a low fixed torque, while at the same time compensating for wear
  • True union design for easier installation or repairs without expanding the pipe system
  • Built-in spanner wrench on the handle for valve disassembly and assembly
  • New PTFE seat design - facilitates easier field maintenance if required
  • Tapered O-ring groove, helps to keep the end connector O-rings on the valve body during installation
  • Body flats, flats have been added to either side of the valve body where a wrench can be applied to prevent the valve body from turning when the union nuts are tightened
  • pdfInstruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/AsahiAmerica_1601005_Instruction_Installation_Manual.pdf
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/AsahiAmerica_1601005_Specification_Sheet.pdf
  • pdfTechnical Bulletin https://assets.unilogcorp.com/267/ITEM/DOC/AsahiAmerica_1605010_Technical_Bulletin.pdf