fantech® 40231 SO-05A-LP40231
fantech® 40231 Centrifugal Fan, 115 V, 4.4 A, 526 W, 2807 rpm Speed
- Manufacturer: Systemair
- Brand Name: fantech®
- Part#: SO-05A-LP40231
- MPN: 40231
- Min. Order Qty: 1
- Qty. Interval: 1
-
Available at Vero Beach
-
Available at All Branches
-
Price:
Fans are designed for easy installation and can be mounted in any angle. RE Series fans are approved for use as remote-mount exhausters with residential range hoods. Motors are capable of operating in air stream temperatures of up to 140 deg F. Fans are provided with either a flat base (RE Models) for flashing on pitched/shingle roofs and vertical walls or with a flanged base (REC Models) for curb-mounting. All units are 100% speed controllable through a decrease in voltage using either a solid state or transformer-type speed control. RE(C) exhausters can be supplied with optional equipment including, duct-mounting clamps, backdraft dampers and more. All units are backed by fantech® 5 years warranty.
fantech® Centrifugal Fan, 4.4 A, 115 V, 60 Hz, 1 ph Phase, 526 W, 2807 rpm, Roof/Wall Mounting, Sheet Metal, Finish: Baked-On Enamel/Galvanized, Gray, 10-15/16 in L x 6 in W
| Amperage Rating | : | 4.4 A |
| Color | : | Gray |
| Dimensions | : | 10-15/16 in L x 6 in W |
| Finish | : | Baked-On Enamel/Galvanized |
| Frequency Rating | : | 60 Hz |
| Material | : | Sheet Metal |
| Mounting Type | : | Roof/Wall |
| Phase | : | 1 ph |
| Power Rating | : | 526 W |
| SPECIAL_ORDER_ITEM | : | Y |
| Speed Rating | : | 2807 rpm |
| Voltage Rating | : | 115 V |
- 100% speed controllable
- Suitable for airstream temperatures of up to 140 deg F
- Excellent heat dissipation for long motor life
- Built-in thermal overload protection with automatic reset
- Fan air flow performance shall be based upon test conducted in accordance with AMCA standard 211 and 311 and shall be licensed to bear the AMCA certified ratings label
- Fan shall be tested and approved by UL and CSA (or equal) for safety
- Fan base shall be permanently-mounted to roof or vertical wall (flat flashing base) or to a curb (flanged base)
- A conduit chase shall be provided for running electrical wiring through the base into the fan terminal box
- Motorized impeller shall be an external rotor type with permanent split capacitor, motor shall be a permanently sealed self-lubricating ball bearing type
- Motor shall be equipped with automatic reset thermal overload protection
- Motor shall be acceptable for continuous-duty
- Sufficient service factor shall be provided to ensure long maintenance-free operation over maximum load conditions
- Fan wheel shall be of the backward inclined centrifugal-type with a well designed inlet venturi for maximum performance
- Motorized impeller shall be both statically and dynamically balanced as one integral unit to provide for vibration-free performance
Catalog