Rain Bird® X54600 76A-XP600X

Rain Bird® Xeri-Pop™ micro-spray is the only pop-up spray that works in low volume, low pressure applications. Xeri-Pop™ can be installed nearly anywhere, making them a great out of sight solution in vandal-prone areas or else small, odd shaped planting beds. The Xeri-Pop™ in combination with an SQ nozzle meets micro irrigation system requirements with less than 26 gph flow rate at 30 psi.

Rain Bird® Durable Micro Spray, XP Series, Pop-Up Nozzle, Half-Square Spray Pattern, 2-1/2 to 4 ft Coverage Area, 20 to 50 psi, 26 gph Flow Rate, 1/4 in Tube, 1/4 in Connection, Barbed Connection, Plastic, 6 in Overall Height, Additional Information: 40 Mesh Filtration

• Rain Bird® Xeri-Pop™ come with a pre installed SQ Series nozzle with a half-square spray pattern (SQ-HLF)
• The half-square spray pattern and pressure compensation increase efficiency and control, reducing overspray
• The Xeri-Pop stem with an SQ Series nozzle pops up to water and then pops back down to flush retract at system shut off
• With Xeri-Pop™ edge-to-edge coverage you can easily design and install in small spaces
• Rain Bird® Xeri-Pop™ connect to the water supply via 1/4 in distribution tubing instead of threading onto conventional 1/2 in fittings
• The 1/4 in inlet of the Xeri-Pop limits the amount of flow available to the nozzle
• Exceeding a flow of 0.6 gpm may cause too much frictional pressure loss
• Xeri-Pop™ also have a protective flange to the bottom of the head to help protect the barb from possible damage
• Maintenance caused when conventional micro sprays with small diameter threads snap off adapters is eliminated
• A durable, plastic snap collar secures the 1/4 in tubing to the outside of the Xeri-Pop case
• The sprinkler body, stem and base shall be constructed of heavy-duty, UV-resistant plastic
• The sprinkler shall have a heavy-duty stainless steel retracting spring for positive pop-down and it shall have a ratcheting system for easy alignment of the pattern
• The Xeri-Pop shall have a soft elastomer pressure activated wiper seal for cleaning debris from the pop-up stem as it retracts into the case to prevent the Xeri-Pop from sticking up to minimize "flow-by"
• The 6 in models shall have a snap collar to secure the 1/4 in distribution tubing to the body
• The Xeri-Pop shall have a bottom inlet barb to accept 1/4 in distribution tubing and shall operate between 20 psi and 50 psi

• Catalog https://assets.unilogcorp.com/267/ITEM/DOC/Rain_Bird_X54600_Catalog.pdf