Contact 772-286-2260

Grundfos 60S30-5 SO-57-G60S30-5
  1. pin-int

Grundfos 60S30-5 SO-57-G60S30-5

Grundfos SP 60S Series A 60S30-5 Submersible Groundwater Pump, 60 gpm, 5.65 to 5.8 A, 440-460 V, 3 hp, 3 ph

  • Manufacturer: Grundfos
  • Brand Name: Grundfos
  • Part#: SO-57-G60S30-5
  • MPN: 60S30-5
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading Available at Vero Beach
  • loading Available at All Branches

Multi-stage submersible pump for raw water supply, groundwater lowering and pressure boosting. The pump is suitable for pumping clean, thin, non-aggressive liquids without solid particles or fibers. The motor is a 3-phase motor with sand shield, liquid-lubricated bearings and pressure equalizing diaphragm.

Grundfos Submersible Groundwater Pump, SP 60S Series, Model: A, 2 in Suction, 2 in NPT Discharge, 60 gpm Flow Rate, 5.65 to 5.8 A, 440-460 V, 3 hp, 3 ph Phase, 60 Hz, 3450 rpm, Maximum Feet of Head: 2800 ft, 40 deg C Maximum Temperature, 60 barg Working Pressure, 304 Stainless Steel Impeller, 304 Stainless Steel Body, 967 mm L x 101 mm W, Additional Information: 5-Stage, 4 in Dia Motor, 998.2 kg/cu-m Density 3HP 230V 1PH MOTOR

Additional Information      :      5-Stage, 4 in Dia Motor, 998.2 kg/cu-m Density
Amperage Rating      :      5.65 to 5.8 A
Body Material      :      304 Stainless Steel
Dimensions      :      967 mm L x 101 mm W
Discharge Size      :      2 in NPT
Flow Rate      :      60 gpm
Frequency Rating      :      60 Hz
HP Rating      :      3 hp
Impeller Material      :      304 Stainless Steel
Maximum Feet of Head      :      2800 ft
Maximum Temperature      :      40 deg C
Model      :      A
Phase      :      3 ph
SPECIAL_ORDER_ITEM      :      Y
Series      :      SP 60S Series
Special Order Item      :      Y
Speed Rating      :      3450 rpm
Suction Size      :      2 in
Voltage Rating      :      440-460 V
Working Pressure      :      60 barg
  • Octagonal discharge design ensures better engagement with a pipe wrench for easier and safer attachment to the drop pipe
  • Screw-mounted cable guard attachment to ensure a secure fit
  • Built-in check valve to minimize the risk of water hammering
  • Corrosion-resistant, robust stainless steel construction - 304, 316, 904L
  • Wear-resistance via less abrasive wear octagonal bearings and sand flush channels that remove particles with the pumped water, sand resistance is further increased by using, the bearing offering longer life in sandy environments
  • Optimized hydraulics ensure increased performance and higher efficiency
  • FKM and PTFE parts make the SP suitable for aggressive water conditions
  • Stop ring protects the pump in case of up thrust
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/Grundfos_14629781_Catalog.pdf
  • pdfInstruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Grundfos_14629781_Instruction_Installation_Manual.pdf
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Grundfos_14629781_Specification_Sheet.pdf