Contact 772-286-2260

Grundfos 40S30-9 SO-57-G40S30-9
  1. pin-int

Grundfos 40S30-9 SO-57-G40S30-9

Grundfos SP 40S Series A 40S30-9 Submersible Groundwater Pump, 39.6 gpm, 11.6 to 11.9 A, 208-230 V, 3 hp, 3 ph

  • Manufacturer: Grundfos
  • Brand Name: Grundfos
  • Part#: SO-57-G40S30-9
  • MPN: 40S30-9
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading Available at Vero Beach
  • loading Available at All Branches

The Grundfos SP Pumps feature superior hydraulic design in a high efficiency and corrosion-resistant product. Invented in 1967, the SP pump was the first ever stainless steel submersible pump - and to this day it remains the benchmark in the market.

Grundfos Submersible Groundwater Pump, SP 40S Series, Model: A, 2 in Suction, 2 in NPT Discharge, 39.6 gpm Flow Rate, 11.6 to 11.9 A, 208-230 V, 3 hp, 3 ph Phase, 60 Hz, 3450 rpm, Maximum Feet of Head: 183.7 ft, 104 deg F Maximum Temperature, 870.23 psi Working Pressure, 304 Stainless Steel Impeller, 304 Stainless Steel Body, 40.7 in L x 3.98 in W, Additional Information: 9-Stage, 4 in Dia Motor, 62.29 lb/cu-ft Density W/ 3HP 460V 3PH MOTOR

Additional Information      :      9-Stage, 4 in Dia Motor, 62.29 lb/cu-ft Density
Amperage Rating      :      11.6 to 11.9 A
Body Material      :      304 Stainless Steel
Dimensions      :      40.7 in L x 3.98 in W
Discharge Size      :      2 in NPT
Flow Rate      :      39.6 gpm
Frequency Rating      :      60 Hz
HP Rating      :      3 hp
Impeller Material      :      304 Stainless Steel
Maximum Feet of Head      :      183.7 ft
Maximum Temperature      :      104 deg F
Model      :      A
Phase      :      3 ph
SPECIAL_ORDER_ITEM      :      Y
Series      :      SP 40S Series
Special Order Item      :      Y
Speed Rating      :      3450 rpm
Suction Size      :      2 in
Voltage Rating      :      208-230 V
Working Pressure      :      870.23 psi
  • Octagonal discharge design ensures better engagement with a pipe wrench for easier and safer attachment to the drop pipe
  • Screw-mounted cable guard attachment to ensure a secure fit
  • Built-in check valve to minimize the risk of water hammering
  • Corrosion-resistant, robust stainless steel construction: 304, 316, 904L
  • Wear-resistance via less abrasive wear octagonal bearings and sand flush channels that remove particles with the pumped water; sand-resistance is further increased by using the bearing offering longer life in sandy environments
  • Optimized hydraulics ensure increased performance and higher efficiency
  • FKM and PTFE parts make the SP suitable for aggressive water conditions
  • Stop ring protects the pump in case of up thrust
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/Grundfos_40S30_9_Catalog.pdf
  • pdfInstruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Grundfos_40S30_9_Instruction_Installation_Manual.pdf
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Grundfos_14629781_Specification_Sheet.pdf