Hunter® FREEZE-CLIK SO-79-FREEZE CLIK

Accidentally irrigating in the middle of a deep freeze is one of the worst things that can happen to a landscape. In some areas, where temperature swings are unpredictable, irrigating during a freeze is not only hazardous to the life of landscapes, it can also be hazardous to those who may walk or drive nearby. With the Hunter® Freeze-Clik® sensor installed in a system, these dangers become a worry of the past. Once freezing temperatures are detected, Freeze-Clik® will automatically shut an irrigation system down. When the temperature returns to an irrigation friendly level, Freeze-Clik® allows scheduled programming to run. Easy to mount and easy use, the Freeze-Clik® can also be paired with other weather sensing devices to guarantee efficient watering during all types of weather.

Hunter® Rain Sensor, 24 V, 6 A, Wired Connection, 6 in L x 2 in H

• Installs easily with no adjustment needed
• Accurate temperature sensing shuts system Off when air temperature reaches 37 deg F
• Used with other sensors to enhance overall efficiency of irrigation systems
• Typically interrupts the common ground wire between the solenoid valves and the controller UL listed

• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Hunter_FREEZECLIK_Instruction_Installation_Manual.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Hunter_FREEZECLIK_Specification_Sheet.pdf