ARMADA TECHNOLOGIES PRO90 81A-PRO90

The Pro90™ automatic clamp multi-meter is simple to use with easy-to-read controls, perfect for experts and novices alike. With the Pro90™, simplicity starts with a single button, the On/Off switch. It is the only switch on the Pro90™ and the only switch that you need. After one push of the button to turn it on, the Pro90™ takes care of itself. The Pro90™ automatically measures voltage, resistance and amperage, as well as turns itself off when it's not in use. It even automatically backlights when you're working in the dark, the screen automatically lights. Troubleshooting has never been so easy.

ARMADA TECHNOLOGIES Auto Range Multimeter, 0.6 to 400 A, 10 kOhm Resistance, Alkaline Battery, Additional Information: 1.3 to 600 VAC, 1.8 to 600 VDC

• Test for voltage from 1.3 to 600 VAC or 1000 VDC, if it senses voltage, the Pro90™ multi-meter measures it, including automatically setting the correct range and determining if the voltage is AC or DC
• If the Pro90™ doesn't detect any voltages, it automatically switches to resistance or Ohm measurement, again auto-ranging, up to 10 kOhm
• A continuity buzzer sounds at less than 25 ohms
• The clamp is also used for measuring AC currents from 0.6 to 400 A, just clamp on to one leg of your electrical circuit and it will do the rest

• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/ARMADA_TECHNOLOGIES_PRO90_Instruction_Installation_Manual.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/ARMADA_TECHNOLOGIES_PRO90_Specification_Sheet.pdf